|
Directional characteristics: |
Omnidirectional |
|
Principle of operation: |
Pressure |
|
Cartridge type: |
Pre-polarized condenser element with vertical diaphragm |
|
Frequency range, ± 2 dB: |
Soft boost grid: 50 Hz ? 20 kHz, 3 dB soft boost at 8 ? 20 kHz, low-cut -10 dB at 20 Hz. High boost grid: 50 Hz ? 20 kHz, 10 dB boost at 12 kHz, low-cut -10 dB at 20 Hz. |
|
Sensitivity, nominal, ±3 dB at 1 kHz: |
1 mV/Pa; -60 dB re. 1 V/Pa |
|
Equivalent noise level, A-weighted: |
Typ. 33 dB(A) re. 20 μPa (max. 37 dB(A)) |
|
Equiv. noise level ITU-R BS.468-4: |
Typ. 45 dB (max. 49 dB) |
|
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
61 dB(A) |
|
Total harmonic distortion (THD): |
< 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine |
|
Dynamic range: |
Typ. 90 dB |
|
Max. SPL, peak before clipping: |
154 dB |
|
Output impedance: |
30 ? 40 ohm |
|
Cable drive capability: |
Up to 300 m (984 ft) |
|
Power supply: |
For wireless systems: Min. 3 V ? max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance. |
|
Connector: |
MicroDot |
|
Color: |
Black, brown or beige |
|
Microphone weight: |
14 g (0.5 oz) incl. cable and MicroDot connector |
|
Microphone diameter: |
5.4 mm (0.21 in) |
|
Cable length: |
1.2 m (3.9 ft) |
|
Cable diameter: |
1.6 mm (0.06 in) |
|
Polarity: |
Positively increasing sound pressure produces positive going voltage on MicroDot pin |
|
Operating temperature range: |
-10 to 45°C (14 to 113°F) |
