|
|
ALL MODELS
|
|
Distortion (Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power
|
Less than 0.01% THD
Less than 0.01% THD
|
|
Frequency Response (typical)
|
20 Hz-20 kHz, ± 0.2 dB 8 Hz-50 kHz, +0/-3 dB
|
|
Damping Factor
|
Greater than 500 (1 kHz and below)
|
|
Input Impedance
|
6k ohms unbalanced, 12k ohms balanced
|
|
Cooling
|
Variable speed fan, rear to front airflow through tunnel heat sink
|
|
Connectors, each channel
|
Input: 3 position Euro-style detachable barrier block, Ch 1,2,3 & 4
DataPort: HD-15 Connector, Ch 1+2, Ch 3+4
Output: Six-position barrier strip with monitor connections, Ch 1+2, Ch 3+4
|
|
Amplifier Protection
|
Full short circuit, open circuit, thermal, ultrasonic, & protection. Stable into reactive or mismatched loads.
|
|
Load Protection
|
On/off muting, DC-fault power supply protection
|
|
Indicators
|
PARALLEL INPUTS: Red LED
BRIDGED: Yellow LED
PWR-ON: Green LED
|
CLIP/PROT: Red LED (1 per channel)
LEVEL-10 dB: Yellow LED (1 per channel)
LEVEL-20 dB: Yellow LED (1 per channel)
SIGNAL -35 dB: Green LED (1 per channel)
|
|
Controls
|
Controls Front: AC switch, Ch.1 and Ch.2 gain knobs
Rear: DIP switch for Ch.1 and Ch.2: clip limiter on/off, LF filter on/off,
LF filter freq select 33 Hz or 75 Hz for non-V models; 50 Hz or 75 Hz for V models; inputs parallel or stereo; bridge mode
|
|
Dimensions
|
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces),
14" (35.6 cm) deep (from front mounting rails)
|
|
Weight
|
21 lb (9.5 kg) net, 27 lbs (12.3 kg) Shipping
|
|
Power Requirements
|
100, 120, 230 Vac, 50-60 Hz
|
