Directional characteristics: |
Supercardioid |
Principle of operation: |
Pressure gradient |
Cartridge type: |
Pre-polarized condenser |
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: |
80 Hz ? 15 kHz with 2 dB soft boost at 10 ? 12 kHz, second order low-cut filter at 80 Hz with DAD4099 |
Sensitivity, nominal, ±3 dB: |
6 mV/Pa; - 44,5 dB re. 1 V/Pa |
Equivalent noise level A-weighted: |
Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) |
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
71 dB |
Total harmonic distortion (THD): |
<1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine |
Dynamic range: |
100 dB |
Max. SPL, peak before clipping: |
142 dB |
Output impedance: |
From MicroDot: 30 ? 40 ohm, from DAD4099: 100 ohm |
Cable drive capability: |
300 m (984 ft) with DAD4099 |
Output balance principle: |
Signal balanced with enclosed DAD4099 XLR adapter |
Common Mode Rejection Ratio (CMRR): |
> 60 dB at 50 Hz to 15 kHz with DAD4099 XLR adapter |
Power supply: |
Min. 5 V ? max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD4099 XLR adapter |
Current consumption: |
1.5 mA; 3.5 mA with DAD4099 XLR adapter |
Connector: |
MicroDot |
Color: |
Black |
Weight: |
36 g (1.27 oz) |
Capsule diameter: |
5.4 mm (0.2 in) |
Microphone length: |
45 mm (1.8 in) |
Cable length: |
1.8 m (6 ft) |
Polarity: |
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD4099 XLR adapter) |
Operating temperature range: |
-40 °C to 45 °C (14 °F to 113 °F) |
Relative humidity: |
Up to 90 % |
Gooseneck, length: |
140 mm (5.5 in) |
Holder: |
Fits instruments with a body depth between 35 mm (1.4 in) and 122 mm (4.8 in) |