TURBOSOUND : TCS-122

 

TCS-122.PDF	TCS-122 Photos 1
TCS-122 Photos 2	TCS-122 Photos 3

Active/passive two-way loudspeaker

The TCS-122 is a switchable passive/bi-amp two-way loudspeaker enclosure consisting of a 12" reflex-loaded low frequency driver and a 1.4" high frequency compression driver with a choice of factory-supplied HF horn pattern options on a rotatable Dendritic waveguide in an optimally tuned enclosure.

These high grade components are matched with an internal passive crossover, which can be by-passed for fully bi-amped operation. Three HF dispersion options are available to allow the creation of flexible loudspeaker arrays to suit any audience space.

The cabinet is constructed from 15mm (5/8") birch plywood with a powder-coated perforated steel mesh grille backed with reticulated foam. The double trapezoidal cabinet shape conveniently allows the TCS-122 to be arrayed with other TCS series enclosures and TCS subwoofers. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet to enable it to be suspended and angled in permanent installations using M10 shoulder eyebolts. The TCS-122 is also fitted with internal rigging points for use with Turbosound and OmniMount™ wall and ceiling brackets.

The standard finish is black textured paint, or the TCS-122 can be special ordered in custom colours including white. An IP54 weather-resistant version is available with a stainless steel grille, black or white weatherproof paint finish, and a captive cable with cable gland.

A Speakon NL4 speaker connector is located on the rear panel in parallel with a 4-way barrier strip providing input and loop-through connections to additional TCS series cabinets.
 

Net Weight	30kg (66lbs)
Dimensions	803mm x 403mm x 416mm (31.6" x 15.9" x 16.4")
Components	1 x 12” (305mm) LF driver, 1 x 1.4” (35mm) HF driver
Frequency Response	70Hz - 20kHz ±3dB; 50Hz - 20kHz ±10dB
Dispersion	60°H x 40°V (TCS-122/64), 90°H x 60°V (TCS-122/96), 90°H x 40°V (TCS-122/94) @ -6dB points. All horn patterns are rotatable within the enclosure
Power Handling	HF: 100 watts r.m.s., 200 watts program; LF: 500 watts r.m.s., 1000 watts program, passive: 500 watts r.m.s., 1000 watts program
Sensitivity	HF: 104dB, LF: 95dB, 1 watt @ 1 metre; Passive: 95dB, 1 watt @ 1 metre
Maximum SPL	HF: 124dB continuous, 130dB peak; LF: 122dB continuous, 128dB peak, passive: 122dB continuous, 128dB peak
Impedance	HF: 8 ohms, LF: 8 ohms; Passive: 8 ohms
Crossover	Internal passive network at 1.2kHz; 12dB/octave low-pass, 24dB/octave high-pass
Construction	15mm (5/8”) birch plywood. Finished in black semi-matt textured paint
Grille	Powder-coated perforated steel with foam backing
Connectors	(1) Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C (passive); pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative (active); (1) 4-way barrier strip connector
Flying Hardware	(9) M10 internal rigging points with internal steel strips for M10 eyebolts (4) M10 internal rigging points for WB-55 and CB-55 brackets (4) M8 internal rigging points for OmniMount™ 120 series brackets
Options	White and custom colours; IP54 weather-resistance: stainless steel grille; black or white weatherproof paint finish; captive cable with cable gland
Spares & Accessories	LS-1222 12” (305mm) LF loudspeaker RC-1222 Recone kit CD-214 1.4” (35mm) HF compression driver RD-214 Replacement diaphragm PX-TCS122/152 Passive crossover WB-55 Wall bracket CB-55 Ceiling bracket EB-40/10 M10x40mm eyebolt