TURBOSOUND : TCS-152   TCS-152.PDF TCS-152 Photos 1 TCS-152 Photos 2 TCS-152 Photos 3 Passive two-way loudspeaker The TCS-152 is a switchable passive/bi-amp two-way loudspeaker enclosure consisting of a 15" reflex-loaded low frequency driver and a 1.4" high frequency compression driver with a choice of factory-supplied HF horn patterns on a rotatable Dendritic waveguide in an optimally tuned enclosure. These high grade components are matched with an internal passive crossover, which can be by-passed for bi-amped operation if required. Three HF dispersion options are available to allow the creation of flexible loudspeaker arrays to suit any audience space. The cabinet is constructed from 15mm (5/8") birch plywood with a powder-coated perforated steel mesh grille backed with reticulated foam. The double trapezoidal cabinet shape conveniently allows the TCS-152 to be arrayed with other TCS series enclosures and TCS series subwoofers. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet to enable it to be suspended and angled in permanent installations using M10 shoulder eyebolts. The enclosure is also fitted with internal rigging points for use with Turbosound and OmniMount™ wall and ceiling brackets. The standard finish is black textured paint, with white and custom colours as special order options. IP54 weather-resistance is optionally available. A Speakon NL4 connector is located on the rear panel in parallel with a 4-way barrier strip providing input and loop-through connections to additional TCS cabinets.   Net Weight 36kg (79.2lbs) Dimensions 838mm x 469mm x 433mm (33" x 18.5" x 17") Components 1 x 15" (381mm) LF driver, 1 x 1.4" (35mm) HF driver Frequency Response 65Hz - 20kHz ±3dB, 45Hz - 20kHz ±10dB Dispersion 60°H x 40°V (TCS-152/64), 90°H x 60°V (TCS-152/96), 90°H x 40°V (TCS-152/94) @-6dB points. All horn patterns are rotatable within the enclosure Power Handling HF: 100 watts r.m.s., 200 watts program; LF: 500 watts r.m.s., 1000 watts program; Passive: 500 watts r.m.s., 1000 watts program Sensitivity HF: 104dB, LF: 95dB, 1 watt @ 1 metre; Passive: 95dB, 1 watt @ 1 metre Maximum SPL HF: 124dB continuous, 130dB peak; LF: 122dB continuous, 128dB peak; Passive: 122dB continuous, 128dB peak Impedance HF: 8 ohms, LF: 8 ohms; Passive: 8 ohms Crossover Internal passive network at 1.2kHz; 12dB/octave low-pass, 24dB/octave high-pass Construction 15mm (5/8") birch plywood. Finished in black semi-matt textured paint Grille Powder-coated perforated steel with foam backing Connectors (1) Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C (passive); pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative; (1) 4-way barrier strip connector Flying Hardware (9) M10 internal rigging points with internal steel strips for M10 eyebolts (4) M10 internal rigging points for WB-55 and CB-55 brackets (4) M8 internal rigging points for OmniMount™ 120 series brackets Options White and custom colours; IP54 weather-resistance: stainless steel grille; black or white weatherproof paint finish; captive cable with cable gland Spares & Accessories LS-1529 15" (381mm) LF loudspeaker RC-1529 Recone kit CD-214 1.4" (35mm) HF compression driver RD-214 Replacement diaphragm PX-TCS122/152 Passive crossover EB-10/40 M10x40mm eyebolt WB-55 Wall bracket CB-55 Ceiling bracket

TURBOSOUND : TCS-152   TCS-152.PDF TCS-152 Photos 1 TCS-152 Photos 2 TCS-152 Photos 3 Passive two-way loudspeaker The TCS-152 is a switchable passive/bi-amp two-way loudspeaker enclosure consisting of a 15" reflex-loaded low frequency driver and a 1.4" high frequency compression driver with a choice of factory-supplied HF horn patterns on a rotatable Dendritic waveguide in an optimally tuned enclosure. These high grade components are matched with an internal passive crossover, which can be by-passed for bi-amped operation if required. Three HF dispersion options are available to allow the creation of flexible loudspeaker arrays to suit any audience space. The cabinet is constructed from 15mm (5/8") birch plywood with a powder-coated perforated steel mesh grille backed with reticulated foam. The double trapezoidal cabinet shape conveniently allows the TCS-152 to be arrayed with other TCS series enclosures and TCS series subwoofers. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet to enable it to be suspended and angled in permanent installations using M10 shoulder eyebolts. The enclosure is also fitted with internal rigging points for use with Turbosound and OmniMount™ wall and ceiling brackets. The standard finish is black textured paint, with white and custom colours as special order options. IP54 weather-resistance is optionally available. A Speakon NL4 connector is located on the rear panel in parallel with a 4-way barrier strip providing input and loop-through connections to additional TCS cabinets.   Net Weight 36kg (79.2lbs) Dimensions 838mm x 469mm x 433mm (33" x 18.5" x 17") Components 1 x 15" (381mm) LF driver, 1 x 1.4" (35mm) HF driver Frequency Response 65Hz - 20kHz ±3dB, 45Hz - 20kHz ±10dB Dispersion 60°H x 40°V (TCS-152/64), 90°H x 60°V (TCS-152/96), 90°H x 40°V (TCS-152/94) @-6dB points. All horn patterns are rotatable within the enclosure Power Handling HF: 100 watts r.m.s., 200 watts program; LF: 500 watts r.m.s., 1000 watts program; Passive: 500 watts r.m.s., 1000 watts program Sensitivity HF: 104dB, LF: 95dB, 1 watt @ 1 metre; Passive: 95dB, 1 watt @ 1 metre Maximum SPL HF: 124dB continuous, 130dB peak; LF: 122dB continuous, 128dB peak; Passive: 122dB continuous, 128dB peak Impedance HF: 8 ohms, LF: 8 ohms; Passive: 8 ohms Crossover Internal passive network at 1.2kHz; 12dB/octave low-pass, 24dB/octave high-pass Construction 15mm (5/8") birch plywood. Finished in black semi-matt textured paint Grille Powder-coated perforated steel with foam backing Connectors (1) Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C (passive); pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative; (1) 4-way barrier strip connector Flying Hardware (9) M10 internal rigging points with internal steel strips for M10 eyebolts (4) M10 internal rigging points for WB-55 and CB-55 brackets (4) M8 internal rigging points for OmniMount™ 120 series brackets Options White and custom colours; IP54 weather-resistance: stainless steel grille; black or white weatherproof paint finish; captive cable with cable gland Spares & Accessories LS-1529 15" (381mm) LF loudspeaker RC-1529 Recone kit CD-214 1.4" (35mm) HF compression driver RD-214 Replacement diaphragm PX-TCS122/152 Passive crossover EB-10/40 M10x40mm eyebolt WB-55 Wall bracket CB-55 Ceiling bracket

TURBOSOUND : TCS-152   TCS-152.PDF TCS-152 Photos 1 TCS-152 Photos 2 TCS-152 Photos 3 Passive two-way loudspeaker The TCS-152 is a switchable passive/bi-amp two-way loudspeaker enclosure consisting of a 15" reflex-loaded low frequency driver and a 1.4" high frequency compression driver with a choice of factory-supplied HF horn patterns on a rotatable Dendritic waveguide in an optimally tuned enclosure. These high grade components are matched with an internal passive crossover, which can be by-passed for bi-amped operation if required. Three HF dispersion options are available to allow the creation of flexible loudspeaker arrays to suit any audience space. The cabinet is constructed from 15mm (5/8") birch plywood with a powder-coated perforated steel mesh grille backed with reticulated foam. The double trapezoidal cabinet shape conveniently allows the TCS-152 to be arrayed with other TCS series enclosures and TCS series subwoofers. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet to enable it to be suspended and angled in permanent installations using M10 shoulder eyebolts. The enclosure is also fitted with internal rigging points for use with Turbosound and OmniMount™ wall and ceiling brackets. The standard finish is black textured paint, with white and custom colours as special order options. IP54 weather-resistance is optionally available. A Speakon NL4 connector is located on the rear panel in parallel with a 4-way barrier strip providing input and loop-through connections to additional TCS cabinets.   Net Weight 36kg (79.2lbs) Dimensions 838mm x 469mm x 433mm (33" x 18.5" x 17") Components 1 x 15" (381mm) LF driver, 1 x 1.4" (35mm) HF driver Frequency Response 65Hz - 20kHz ±3dB, 45Hz - 20kHz ±10dB Dispersion 60°H x 40°V (TCS-152/64), 90°H x 60°V (TCS-152/96), 90°H x 40°V (TCS-152/94) @-6dB points. All horn patterns are rotatable within the enclosure Power Handling HF: 100 watts r.m.s., 200 watts program; LF: 500 watts r.m.s., 1000 watts program; Passive: 500 watts r.m.s., 1000 watts program Sensitivity HF: 104dB, LF: 95dB, 1 watt @ 1 metre; Passive: 95dB, 1 watt @ 1 metre Maximum SPL HF: 124dB continuous, 130dB peak; LF: 122dB continuous, 128dB peak; Passive: 122dB continuous, 128dB peak Impedance HF: 8 ohms, LF: 8 ohms; Passive: 8 ohms Crossover Internal passive network at 1.2kHz; 12dB/octave low-pass, 24dB/octave high-pass Construction 15mm (5/8") birch plywood. Finished in black semi-matt textured paint Grille Powder-coated perforated steel with foam backing Connectors (1) Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C (passive); pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative; (1) 4-way barrier strip connector Flying Hardware (9) M10 internal rigging points with internal steel strips for M10 eyebolts (4) M10 internal rigging points for WB-55 and CB-55 brackets (4) M8 internal rigging points for OmniMount™ 120 series brackets Options White and custom colours; IP54 weather-resistance: stainless steel grille; black or white weatherproof paint finish; captive cable with cable gland Spares & Accessories LS-1529 15" (381mm) LF loudspeaker RC-1529 Recone kit CD-214 1.4" (35mm) HF compression driver RD-214 Replacement diaphragm PX-TCS122/152 Passive crossover EB-10/40 M10x40mm eyebolt WB-55 Wall bracket CB-55 Ceiling bracket

TURBOSOUND : TCS-152

 

TCS-152.PDF	TCS-152 Photos 1
TCS-152 Photos 2	TCS-152 Photos 3

Passive two-way loudspeaker

The TCS-152 is a switchable passive/bi-amp two-way loudspeaker enclosure consisting of a 15" reflex-loaded low frequency driver and a 1.4" high frequency compression driver with a choice of factory-supplied HF horn patterns on a rotatable Dendritic waveguide in an optimally tuned enclosure.

These high grade components are matched with an internal passive crossover, which can be by-passed for bi-amped operation if required. Three HF dispersion options are available to allow the creation of flexible loudspeaker arrays to suit any audience space.

The cabinet is constructed from 15mm (5/8") birch plywood with a powder-coated perforated steel mesh grille backed with reticulated foam. The double trapezoidal cabinet shape conveniently allows the TCS-152 to be arrayed with other TCS series enclosures and TCS series subwoofers. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet to enable it to be suspended and angled in permanent installations using M10 shoulder eyebolts. The enclosure is also fitted with internal rigging points for use with Turbosound and OmniMount™ wall and ceiling brackets.

The standard finish is black textured paint, with white and custom colours as special order options. IP54 weather-resistance is optionally available.

A Speakon NL4 connector is located on the rear panel in parallel with a 4-way barrier strip providing input and loop-through connections to additional TCS cabinets.
 

Net Weight	36kg (79.2lbs)
Dimensions	838mm x 469mm x 433mm (33" x 18.5" x 17")
Components	1 x 15" (381mm) LF driver, 1 x 1.4" (35mm) HF driver
Frequency Response	65Hz - 20kHz ±3dB, 45Hz - 20kHz ±10dB
Dispersion	60°H x 40°V (TCS-152/64), 90°H x 60°V (TCS-152/96), 90°H x 40°V (TCS-152/94) @-6dB points. All horn patterns are rotatable within the enclosure
Power Handling	HF: 100 watts r.m.s., 200 watts program; LF: 500 watts r.m.s., 1000 watts program; Passive: 500 watts r.m.s., 1000 watts program
Sensitivity	HF: 104dB, LF: 95dB, 1 watt @ 1 metre; Passive: 95dB, 1 watt @ 1 metre
Maximum SPL	HF: 124dB continuous, 130dB peak; LF: 122dB continuous, 128dB peak; Passive: 122dB continuous, 128dB peak
Impedance	HF: 8 ohms, LF: 8 ohms; Passive: 8 ohms
Crossover	Internal passive network at 1.2kHz; 12dB/octave low-pass, 24dB/octave high-pass
Construction	15mm (5/8") birch plywood. Finished in black semi-matt textured paint
Grille	Powder-coated perforated steel with foam backing
Connectors	(1) Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C (passive); pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative; (1) 4-way barrier strip connector
Flying Hardware	(9) M10 internal rigging points with internal steel strips for M10 eyebolts (4) M10 internal rigging points for WB-55 and CB-55 brackets (4) M8 internal rigging points for OmniMount™ 120 series brackets
Options	White and custom colours; IP54 weather-resistance: stainless steel grille; black or white weatherproof paint finish; captive cable with cable gland
Spares & Accessories	LS-1529 15" (381mm) LF loudspeaker RC-1529 Recone kit CD-214 1.4" (35mm) HF compression driver RD-214 Replacement diaphragm PX-TCS122/152 Passive crossover EB-10/40 M10x40mm eyebolt WB-55 Wall bracket CB-55 Ceiling bracket