PT-VW345NZ / VW340Z

ModelPT-VW345NZPT-VW340Z
Power supply100-240 V AC, 50/60 Hz
Power consumption100-120 V AC: 300 W, 220-240 V AC: 280 W
(0.4 W when STANDBY MODE set to ECO,*1
5 W when STANDBY MODE set to Network,
14 W when STANDBY MODE set to Normal.)		100-120 V AC: 300 W, 220-240 V AC: 280 W
(0.4 W when STANDBY MODE set to ECO,*1
1.3 W when STANDBY MODE set to Network,
9 W when STANDBY MODE set to Normal.)
LCD panelPanel size15.0 mm (0.59 in) (16:10 aspect ratio)
Display methodTransparent LCD panel (x 3, R/G/B)
Pixels1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels
Lens1.6x manual zoom (throw ratio: 1.2-1.9:1),
manual focus, F 1.60-2.12, f 15.30-24.64 mm
Lamp230 W x 1,
lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 4,000 hours/5,000 hours/6,000 hours*2
Screen size (diagonal)0.76-7.62 m (30-300 in), 16:10 aspect ratio
Brightness*33,700 lm
(input signals: PC, lamp power: Normal, picture mode: Dynamic)
Center-to-corner uniformity*385 %
Contrast*33,000:1 (full on/off)
(input signals: PC, lamp power: Normal, picture mode: Dynamic, IRIS: On)
Resolution1,280 x 800 pixels*4
Scanning frequencyHDMIfH: 15-80 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
RGB (analog)fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 162 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-VideofH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift49:1 (fixed)
Keystone correction rangeVertical: ±40°
(±30° when using Easy Setting)
(maximum value of WXGA input),
horizontal: ±30°
(±20° when using Easy Setting)
(maximum value of WXGA input)		Vertical: ±40°
(±30° when using AUTO)
(maximum value of WXGA input),
horizontal: ±30°
(maximum value of WXGA input)
InstallationCeiling/floor, front/rear
TerminalsHDMI INHDMI 19-pin x 1 (compatible with HDCP, Deep Color)
480i*5, 480p, 576i*5, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p,
1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER 1 IND-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
COMPUTER 2 IN /
MONITOR OUT		D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
VIDEO INPin jack x 1 (Composite VIDEO)
S-VIDEO INMini DIN 4-pin x 1 (S-VIDEO)
AUDIO 1 INM3 x 1 (L-R x 1)
AUDIO 2 IN
(MIC IN)		M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO 3 INPin jack x 2 (L, R x 1)
AUDIO OUTM3 x 1 (L-R x 1) for output (variable)
SERIAL IND-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LANRJ-45 x 1
(for network connection, 10BASE-T/100BASE-TX, compliant with PJLink™)
USB AUSB type-A
(for the USB Memory Viewer) x 1		-
USB BUSB type-B
(for the USB Display) x 1		-
Built-in speaker4.0 cm (1-9/16 in) round shape x 1, output power: 10.0 W (monaural)
Noise level*335 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materialsMolded plastic
Dimensions (W x H x D)352 x 98.0*7 x 279.4*8 mm (13-27/32 x 3-27/32*7 x 11*8 in)
Weight*9Approx. 3.4 kg (7.5 lbs)Approx. 3.3 kg (7.3 lbs)
Operating temperature0°C-40°C [32°F-104°F]
(less than 1,400 m [4,593 ft] above sea level, HIGH ALTITUDE MODE: OFF),
0°C-30°C [32°F-86°F]
(between 1,400 m and 2,000 m [4,593 ft and 6,562 ft] above sea level,
HIGH ALTITUDE MODE: HIGH 1),
0°C-30°C [32°F-86°F]
(between 2,000 m and 2,700 m [6,562 ft and 8,858 ft] above sea level,
HIGH ALTITUDE MODE: HIGH 2)
Operating humidity10-80 % (no condensation)
WirelessStandard2.4 GHz: IEEE802.11b/g/n,
5.0 GHz: IEEE802.11a/n		-
Infrastructure
mode		WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES),
128 bit/64 bit WEP,
WPA-EAP/WPA2-EAP
(PEAP [MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS [MD5/MS-CHAPv2])
128bit/64bit		-
Supplied accessoriesPower cord x 1*10, wireless remote control unit x 1,
batteries (AAA/R03/LR03 type x 2), computer cable x 1
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software,
Wireless Manager ME 6.0)		Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
*1
When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commandscan be received for external control using the serial terminal.
*2
This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time,
the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp.
*3
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4
Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5
Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*6
Compliant with VESA CVT-RB.
*7
With legs at shortest position.
*8
Including protruding parts.
*9
The above values are averages. Actual values may be different according to the product.
*10
Power cords available (x 2) for the UK and Asia only.