PT-LW330 / LW280
Model
PT-LW330
PT-LW280
Power supply
100-240 V AC, 50/60 Hz
Power consumption
300 W
(0.5 W when STANDBY MODE set to ECO,*1 6 W when STANDBY MODE set to Normal.)
LCD panel
Panel size
15.0 mm (0.59 in) diagonal (16:10 aspect ratio)
Display method
Transparent LCD panel (x 3, R/G/B)
Pixels
1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels
Lens
1.2x manual zoom (throw ratio: 1.48-1.78:1),
manual focus, F=1.6-1.76, f=19.16-23.02 mm 1.2x manual zoom (throw ratio: 1.47-1.77:1),
manual focus, F=2.1-2.25, f=19.11-22.94 mm
Lamp
230 W x 1,
lamp replacement cycle (lamp control: Normal/Eco1/Eco2): 5,000 hours/6,000 hours/8,000 hours*2
Screen size (diagonal)
0.76-7.62 m (30-300 in), 16:10 aspect ratio
Brightness*3
(Lamp control: Normal)
3,300 lm 2,800 lm
Center-to-corner uniformity*3
80 %
Contrast*3
10,000:1 (full on/off)
(RGB signal input, Lamp control: Normal, Color mode: Dynamic, Iris: On)
Resolution
1,280 x 800 pixels*4
Scanning frequency
HDMI IN
fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 25 MHz-162 MHz
RGB
fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 59.94 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-Video
fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]
Optical axis shift
13:1 (fixed)
Keystone correction range
Vertical
±30°
Horizontal
±15°
Installation
Ceiling/floor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (compatible with HDCP, Deep Color)
480i*5, 480p, 576i*5, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p,
1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER 1 IN
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR /S-VIDEO x 1)
(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)
COMPUTER 2 IN/
MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
VIDEO IN
Pin jack x 1 (Composite VIDEO)
AUDIO 1 IN
M3 x 1 (L-R x 1)
AUDIO 2 IN
Pin jack x 2 (L, R x 1)
AUDIO OUT
M3 x 1 (L-R x 1) for output (variable)
SERIAL IN
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN
RJ-45 x 1
(for network connection, 10BASE-T/100BASE-TX, compliant with PJLink™)
USB A
USB type-A (for the Memory Viewer) x 1
USB B
USB type-B (for the USB Display) x 1
Built-in speaker
10 W (monaural) x 1
Noise level*3
37 dB (lamp control: Normal), 33 dB (lamp control: Eco1), 28 dB (lamp control: Eco2)
Cabinet materials
Molded plastic (PC)
Dimensions (W x H x D)
335 mm x 96 mm*7 x 252 mm (13-3/16 x 3-25/32*7 x 9-29/32 in)
Weight*8
Approx. 2.8 kg (6.2 lbs)
Operating temperature
5 °C-40 °C (41 °F-104 °F)
(less than 1,400 m [4,500 ft] above sea level),
5 °C-35 °C (41 °F-95 °F)
(between 1,400 m and 2,700 m [4,500 ft and 8,800 ft] above sea level)
Operating humidity
20-80 % (no condensation)
Supplied accessories
Power cord x 1*9, wireless remote control unit x 1,
batteries (AAA/R03/LR03 type x 2), computer cable (1.5 m, for VGA) x 1,
Software CD-ROM (Multi Projector Monitoring & Control Software)
*1When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commands can be received for external control using the serial terminal.*2The value for the recommended lamp replacement cycle is the maximum value, at which luminance will become 50 %.
The usage environment affects the duration of the lamp.*3Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.*4Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.*5Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).*6Compliant with VESA CVT-RB.*7With legs at shortest position.*8The above values are averages. Actual values may be different according to the product.*9Power cords available (x 2) for Asia model only.